Foam Core
Lightweight, easy to trim, built for everyday mounting.
A polystyrene foam center faced with smooth, clay-coated, bright white paper on both sides — moisture-resistant to resist adhesive absorption, UL Classified, and engineered to hold its thickness without warping or denting. UV-stabilized and light enough to handle in volume. The standard choice for photos, posters, and general graphics.
| SKU | Thickness | Max Size |
|---|---|---|
| FCA | 1/8″ | 48″ × 96″ |
| FCB | 3/16″ | 48″ × 96″ |
Gatorfoam
Dense, rigid-skinned board for display-grade presentation.
Wood-fiber veneer facers bonded to an extruded-polystyrene core — not paper — for extreme rigidity and excellent dent and scratch resistance, with a bright white face built for sharp digital and screen-print results. Coated with Coda's Cold-Mount® white adhesive, it cuts and shapes cleanly with standard shop tools and stays lightweight while holding flat for trade show exhibits, POP displays, and other indoor graphics. Sizes up to 48″ × 96″.
| SKU | Thickness | Max Size |
|---|---|---|
| GFB | 3/16″ | 48″ × 96″ |
| GFD | 1/2″ | 48″ × 96″ |
Styrene
Affordable, moisture-resistant, white throughout.
High-impact polystyrene, solid white (or black) through its full thickness, with an extremely smooth, dead-white finish and a surface treated for sharp, consistent printing. Built with UV-resistant, thermally stable additives — the sign-industry standard for exhibit booths, signage, and general graphics mounting where boards may see handling or humidity.
| SKU | Thickness | Color | Max Size |
|---|---|---|---|
| ST4 | .040″ | White | 30″ × 40″ |
| STB4 | .040″ | Black | 30″ × 40″ |
| ST8 | .080″ | White | 30″ × 40″ |
| STB8 | .080″ | Black | 30″ × 40″ |
Cardboard
Lightweight fiber board for everyday prints.
Bright white, clay-coated paperboard over a 100% recycled core — fully compostable and biodegradable, with Green Recycled Paperboard and FSC Recycled certification, and a coating built for direct screen, offset, or UV printing. Available single- or double-weight, in white or black, for general mounting of smaller prints — the economical, eco-friendly choice when a job doesn't need foam's rigidity.
| SKU | Weight | Color | Max Size |
|---|---|---|---|
| SW | Single, 60pt (~1/16″) | White | 20″ × 24″ |
| DW | Double, 90pt (~3/32″) | White | 20″ × 24″ |
| SWB | Single, 60pt (~1/16″) | Black | 20″ × 24″ |
| DWB | Double, 90pt (~3/32″) | Black | 20″ × 24″ |
Adhesive Rolls
Coda’s pressure-sensitive mounting adhesive.
Coda pioneered coating mounting boards with pressure-sensitive adhesive — Cold-Mount®. Double-faced and double-release, built for high tack and high peel strength, applied by cold-roll lamination. Available on its own roll for custom mounting jobs.
| SKU | Construction | Sizing |
|---|---|---|
| DW Adhesive | Double-faced, 2 paper release liners | Standard & custom up to 20″ × 24″ |
StandOuts & Mural Mounts
Ready-to-hang, finished on arrival.
Gatorfoam mounts pre-coated with our Cold-Mount® CM1 adhesive and edged in banding — similar to a box mount or museum mount — with a moisture barrier on the back to prevent future warping. Pre-drilled holes let you hang flush to the wall with push pins or Velcro strips for a clean, high-tech look. Choose black, white, brushed aluminum, or wood-grain edging. Mural Mounts use the same construction at 1-1/2″ thick for large-format installs, and both are available in custom sizes — including panoramic formats — on request.
| SKU | Thickness | Edging | Max Size |
|---|---|---|---|
| SO | 3/4″ | Black, white, aluminum, wood grain | 40″ × 60″ |
| Mural Mount | 1-1/2″ | Black, white, aluminum, wood grain | 48″ × 96″ |
Not sure which substrate fits your job?
Tell us what you're printing and how it'll be displayed — we'll recommend the right board and get you a sample.